Contact Us:
Bell-Southcn Testing Laboratory(Shenzhen)
Tel :0755-2940 5577
Mobile: 189 2384 7751;
QQ： 2853 00 7198
Fax: 0755 2940 5799
E-mail: Marketing@bell-southcn.com
Address:No.115, 1st Floor, A5 Building, Tianrui Industiral Park, Fuyuan 1st Road, Fuyong, Baoan Distict, Shenzhen, China.
Self-Drive: Interchange of Nanshan Road North and Zhongshan Park Road North
By Subway: Lo Po line "Shenzhen university" station, walk to the South Public Security Bureau of Nanshan (8 minutes), take the 21 bus (6 minutes)
By Bus:Take 22/21/B796/37 bus,get off at Zhongshan Park station,go straight 300m
Hong Kong
Hong Kong Contact the detection
Bell Testing Laboratory (Hong Kong)
Address: 250 Hennessy Road, Wanchai, Hong Kong, Cheuk Nang Plaza 15B-15 floor
Tel: 00 852 2134 9819
Fax: 00 852 3050 1821
粤ICP备2022125644号
Environmental Simulation is a method of determining how a product will perform in a specific environment by accelerating the exposure to that environment. The accelerated test environment may contain elevated or reduced temperatures, increased relative humidity, pressure or other simulated conditions such as exposure to chemicals or salt fog. Electrical and mechanical attributes are often evaluated during or after accelerated environmental exposures to further ascertain the product’s performance under severe conditions. This accelerated aging allows the prediction of how a product will perform throughout its life cycle.
Conducting Anodic Filament (CAF) Testing
Compressive Strength
Corrosion
Differential Scanning Caloritmetry (DSC)
Dynamic Mechnical Analysis (DMA)
Electromigration Resistance (ECM)
Flammability
Fracture Toughness
Humidity
Immersion
Moisture Resistance
Steam Aging
Surface Insulation Resistance (SIR)
Temperature Aging
Temperature Cycling
Tensile Impact
Thermal Gravimetric Analysis (TGA)
Thermal Mechanical Analysis (TMA)
Thermal Shock
Thermal Stress
UL Short-Term and Long-Term Thermal Aging
Vicat Softening Point